Jontow Homelab KVM

= Packages

 $ sudo apt-get install zsh multitail screen sysstat openssh-server nfs-kernel-server
 $ sudo apt-get install qemu-kvm libvirt-bin openvswitch-switch openvswitch-common
 $ sudo apt-get install libpolkit-agent-1-0 libpolkit-backend-1-0 policykit-1
 $ sudo apt-get install virtinst

System Config

• /etc/hosts :

127.0.0.1       localhost
127.0.1.1       vm1

10.49.249.20    vm1.je
10.49.249.21    vm2.je

10.49.254.20    vm1.xc  vm1
10.49.254.21    vm2.xc  vm2

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

• Setup storage repo:

 $ sudo ln -s /vm1-store-0 /vm-store-0

NFS

• /etc/exports (on vm1):

 /vm1-store-0            vm2.xc(rw,sync,no_subtree_check,no_root_squash)

• Enable/start NFS:

 $ sudo systemctl enable nfs-kernel-server
 $ sudo systemctl start nfs-kernel-server