HAR File Format (.AF)

The AF files contain all the information related to HARs; sprites, key-combos, projectile sprites, base damage, etc. The format is not entirely understood but a large portion has been dissected and understood. All AF files are broken up into the following sections:

Fighter Header

This contains the basic data about the HAR. Unmodified speeds, endurance, power, etc.

HAR Number	1 WORD	Must be the same number as in the filename eg: FIGHTR1.AF
Unknown Data	3 bytes	?
Endurance	3 bytes	Max is 2,143,755. Above or below that results in permanantly stunned state.
Unknown Data	1 byte	?
Power	1 WORD	Damage Resistance, max is 8717.
Forward Speed	1 signed DWORD	Speed at which the HAR moves towards opponent
Backward Speed	1 signed DWORD	Speed at which HAR retreats from opponent
Upward Speed	1 signed DWORD	Initial jump speed, this should be negative
Downward Speed	1 signed DWORD	How quickly the HAR falls while being airborne, should be positive
Unknown Data	1 WORD	?

Animation

Animation Header

Animation Number	1 BYTES	Unique Identifier for animation
Unknown Data	8 BYTES	Zero padding?
Overlay Amount	1 WORD	TODO
Frame Count	1 BYTE	How many frames in this animation
Overlay Table	N DWORDS	TODO

Animation String Header

String Length	1 DWORD	Length of the string
String	N BYTES	Animation string
Unknown Data	1 BYTE	?
Number of Extra Strings	1 BYTE	How many other animation strings there are

Extra Animation Strings

String Length	1 WORD	Length of string
String	N BYTES	Extra Animation String
Unknown Data	1 BYTE	?

Sprites

There then follow N sprites, where N is the frame count specified in the animation header.

Sprite Header

Length	1 WORD	Length of sprite
X Position	1 SIGNED WORD	TODO
Y Position	1 SIGNED WORD	TODO
Width	1 WORD	Width of the sprite, in pixels
Height	1 WORD	Height of the sprite, in pixels
Mirrored	1 BYTE	Is the sprite Mirrored

If the sprite's mirrored value is non zero, the sprite data appears elsewhere and the sprite data is fetched from the sprite whose index value is the current's sprite's mirrored value.

Sprite Data

If the sprite is not mirrored, Length bytes of sprite data follow. The sprite data is decoded thusly:

• Initalize X and Y to 0
• Read 1 WORD as P
• Modulus P by 4 to get OPCODE
• Integer divide P by 4 to get DATA
• Compare the OPCODE against the following and take that action

0. Set X to DATA
1. • While DATA is greater than 0
   • Read 1 BYTE
   • Store that byte as the pixel at X,Y in the sprite
   • Increment X
   • Decrement DATA
2. Set Y to DATA
3. End of sprite data

Animation Footer

The first 21 bytes of the animation footer have an unknown purpose. Some possiblities are listed.

Unknown 1	1 BYTE
Unknown 2	1 BYTE
Unknown 3	1 BYTE	Seems to be related to airborne attacks, possibly constraints for positioning (near wall, etc)
Unknown 4	1 BYTE
Unknown 5	1 BYTE
Unknown 6	1 BYTE
Unknown 7	1 BYTE
Unknown 8	1 BYTE
Unknown 9	1 BYTE
Unknown 10	1 BYTE
Unknown 11	1 BYTE
Unknown 12	1 BYTE
Unknown 13	1 BYTE	Next animation to play?
Unknown 14	1 BYTE
Unknown 15	1 BYTE	Animation categories
Unknown 16	1 BYTE	Stamina damage?
Unknown 17	1 BYTE	Seems to be related to throws, maybe velocity of victim?
Unknown 18	1 BYTE	Damage (Value divided by 2.0)
Unknown 19	1 BYTE
Unknown 20	1 BYTE
Unknown 21	1 BYTE
Move String	21 BYTES	Move String
Footer String Length	1 WORD	Length of footer string
Footer String Length	N BYTES	Footer string

Fighter Footer

Magic Number	1 BYTE	Always 250
Filler?	9 BYTES	?
Footer Length	1 WORD	-
Footer	N BYTES	??