Multi-Path Routing

Multi-Path routing with OpenBSD/FreeBSD using GIF interfaces and ifstated.

Multi-Path routing allows you to do several different concepts and methodologies. This article will be focused on fault tolerance. You can certainly use public address space.. no one can stop you... yet this article is geared towards private gif interfaces. A few questions come to mind;

1.) Server outage and you have a ZFS mirror in another location, how can we get there?
2.) Core router that allows other routers to talk to one another has a fiber cut or hardware failure.
3.) Corporate wide redundancy

The first thing to do is install ifstated;

FreeBSD: pkg add ifstated
OpenBSD: pkg_add ifstated

Assuming you have gif tunnels already established?

RouterA

1. ifconfig gif0 create
2. ifconfig gif0 internal1 internal2
3. ifconfig gif0 tunnel external1 external2

RouterB

1. ifconfig gif0 create
2. ifconfig gif0 internal2 internal1
3. ifconfig gif0 tunnel external2 external1

With ifstated installed we can go through the configuration file;

$ more /usr/local/etc/ifstated.conf

init-state auto

pf_check = '( "ping -q -c 1 -W 1 10.0.11.9 > /dev/null" every 10)'


state auto {
        if ! $pf_check {
                set-state int_demoted
        }

        if $pf_check {
                set-state int_promoted
        }
}

state int_demoted {
        init {
                run "sh /etc/netstart"
                run "sh /etc/rc.local2"

        }

        if $pf_check {
                set-state int_promoted
        }
}

state int_promoted {
        init {
                run "sh /etc/netstart"
                run "sh /etc/rc.local" 
                run "sh /usr/local/etc/rc.d/racoon restart"

        }
        if ! $pf_check {
                set-state int_demoted
        }
}

To break this file down so you can understand, the line pf_check is pinging another router every ten seconds.