Latest revision as of 22:49, 4 January 2013

Low Power Workstations

Latest Hardware

Replication

4gb SATA flash module has been copied to fshellsrv /home/dertow/shuttle.iso using:

dd if=/dev/sda | ssh dertow@fshellsrv "dd of=/home/dertow/shuttle.iso"

then to copy this to new flash module:

boot workstation using usb "livecd"

ssh dertow@fshellsrv "dd if=/home/dertow/shuttle.iso" | dd of=/dev/sda

Using separate real disk as Virtualbox storage

sudo VBoxManage internalcommands createrawvmdk -filename ~/lpwinstall.vmdk -rawdisk /dev/sdb ^^ only works with non OSE version of VirtualBox

Settings

Ubuntu 9.04 -> LDAP users have no sound

I have run into a condition where LDAP users lost ability to access the sound card. System->Preferences->Sound showed "Not Connected" after the sound card.

To resolve this, a file named 40-permissions.rules was created and placed in the /etc/udev/rules.d directory.

40-permissions.rules contains:

SUBSYSTEM=="sound",GROUP="DomainUsers"

SUBSYSTEM=="sound",MODE="0666"

Ubuntu 9.10 settings

NFS mount on boot: add nobootwait option to fstab entry

XFCE Settings

XFCE config directory is /etc/xdg

To make xfce-mixer settings static for all users, xfce4-mixer.xml was created by configuring mixer for one user. This file was then placed in the global config directory for XFCE in the following subdirectory: /etc/xdg/xfce4/xfconf/xfce-perchannel-xml

Dual monitors: Get output from 'xrandr' command

xrandr --output <RIGHT> --right-of <LEFT>

Mixer Settings

Sound card: HDA Intel (ALSA Mixer) Playback Controls:

Master:100%
PCM: 100%
Front: 100%
Mic: 90%
Mic Boost: 60% <-- Without this, the other end of the call reports "quiet and crackly" sound

Capture:

capture: 40% (with red dot)
digital: 40% (with red dot)

Switches:

Headphone: checked

Options:

Input source: mic

Twinkle Audio Settings

Ringtone, Speaker, and Mic most likely need to be set to "ALSA:default : Default device"

libasound2 will need to be installed in order for software audio mixing to work in ALSA. (actually it just makes it so you don't have to set it up manually) File:Example.jpg

Power Consumption

-1w consumption when off (no peripherals) - connected directly to power outlet --0.56 power factor

-2w consumption when off (kb, mouse, monitor, ethernet connected) - connected directly to power outlet --0.41 power factor

While booting, max power usage reached was 32w for only a moment. Machine consumes 26w whether idle or running numerous applications. While installing packages, consumption was 27w.

Power Consumption With Monitor

-1w consumption when off (kb, mouse, monitor, ethernet connected) and connected to surge protector with switch off.

-3w consumption with power strip on but monitor and computer switched off.

-3w consumption with monitor and power strip on but computer switched off.

-When booting with monitor and computer through kill-a-watt meter, max usage showed 55w during boot. Idle at login screen they are consuming 49w with a power factor of 0.65

Global XFCE/XUbuntu Icons and User Settings

Basically I wanted a kiosk type setup, but xfce4's kiosk mode SUCKS.

To get global icons the easiest way was to install "Sabayon" which allows you to create profiles for groups of users, and then start up an x session within your x session which you can then customize and save. When the users in the created profile login, they will have the desktop settings created.

A new version of sabayon has been released that is not nearly as bug-filled as previous versions. You can find this here: https://edge.launchpad.net/~sbalneav/+archive/ppa

@@ Line 1: / Line 1: @@
 == Low Power Workstations ==
-*Motherboard: Via Epia SN18000G
+=Latest Hardware=
-*RAM:         2gb
-*Storage:     Compact Flash
-*Case:        VoomPC Automotive Mini-ITX Case
-*OS:          Ubuntu 8.04 (with gnome)
-==General==
+==Replication==
-*Jumpers for power switch are second two in from the right on the back row, with the rows of jumpers away from you
-*Press F11 during POST to select boot device
+gb SATA flash module has been copied to fshellsrv /home/dertow/shuttle.iso using:
-*http://www.tkarena.com/forums/archive/index.php/f-20.html VIA EPIA (Mini-ITX, Nano-ITX, Pico-ITX) Arena
+dd if=/dev/sda | ssh dertow@fshellsrv "dd of=/home/dertow/shuttle.iso"
-*http://www.tkarena.com/forums/via-epia-mini-itx-nano-itx-pico-itx-arena/37123-problems-updating-bios-sn18000.html
+then to copy this to new flash module:
-*http://www.tkarena.com/forums/via-epia-mini-itx-nano-itx-pico-itx-arena/36269-sn18000g-bios-update.html
+boot workstation using usb "livecd"
-*Sound: http://radagast.bglug.ca/epia/epia_howto/x331.html
+ssh dertow@fshellsrv "dd if=/home/dertow/shuttle.iso" | dd of=/dev/sda
-*BIOS updates at: http://www.via.com.tw/en/products/mainboards/downloads.jsp?motherboard_id=550
+===Using separate real disk as Virtualbox storage===
+sudo VBoxManage internalcommands createrawvmdk -filename ~/lpwinstall.vmdk -rawdisk /dev/sdb
+^^ only works with non OSE version of VirtualBox
-==To Do==
+==Settings==
-===*Set-up:===
-* Network user profiles
-===*Add:===
+===Ubuntu 9.04 -> LDAP users have no sound===
-*Java
+I have run into a condition where LDAP users lost ability to access the sound card. System->Preferences->Sound showed "Not Connected" after the sound card.
-*gedit
-===*Fix:===
-*Boot on PS/2 mouse and USB keyboard
-*Solder power LED on prototype
-===*Check on:===
+To resolve this, a file named 40-permissions.rules was created and placed in the /etc/udev/rules.d directory.
-*User/global config files for Ekiga to avoid sound device being set to "Default" on first run
+-permissions.rules contains:
-==Custom Stuff==
+SUBSYSTEM=="sound",GROUP="DomainUsers"
-* Knowplex and Ekiga don't play nice together unless /etc/asound.conf is added so that dmix works
-* Sample /etc/asound.conf
+SUBSYSTEM=="sound",MODE="0666"
-   pcm.snd_card {
+===Ubuntu 9.10 settings===
-        type hw
+NFS mount on boot: add nobootwait option to fstab entry
-        card 0
- }
- pcm.dmixer {
-        type dmix
-        ipc_key 1024
-        slave.pcm "snd_card"
-        slave {
-                period_size 256
-                buffer_size 2048
-                rate 44100
-        }
- }
- pcm.dsnooper {
-        type dsnoop
-        ipc_key 2048
-        slave.pcm "snd_card"
-        slave {
-                period_size 256
- buffer_size 2048
-                rate 44100
-        }
- }
- pcm.duplex {
-        type asym
-        playback.pcm "dmixer"
-        capture.pcm "dsnooper"
- }
- pcm.!default {
-        type plug
-        slave.pcm "duplex"
- }
- buffer_size 2048
-                rate 44100
-        }
- }
-*via_ubuntu_7.04_linux_hd_audio_ig_ver0.8.tar.gz  --> doesn't work because we aren't in 7.04. used linux_audio_driver_v30.zip from viaarena.com instead.
+===XFCE Settings===
+XFCE config directory is /etc/xdg
-*install build-essential for most common stuff needed to build
+To make xfce-mixer settings static for all users, xfce4-mixer.xml was created by configuring mixer for one  user. This file was then placed in the global config directory for XFCE in the following subdirectory: /etc/xdg/xfce4/xfconf/xfce-perchannel-xml
-==Power Consumption Tuning==
-*Consumes 2watts when plugged in and off
+Dual monitors:
-*PWM2 fan in BIOS controls cpu fan after boot
+Get output from 'xrandr' command
-*PWM1 fan in BIOS seems to control fan before/during boot
-*http://www.heatsink-guide.com/  awesome cooling info
+xrandr --output <RIGHT> --right-of <LEFT>
-*http://free-electrons.com/community/videos/conferences/ Embedded Linux Conference Videos
-*[[Sensors]]
+===Mixer Settings===
+Sound card: HDA Intel (ALSA Mixer)
+Playback Controls:
+ Master:100%
+ PCM: 100%
+ Front: 100%
+ Mic: 90%
+ Mic Boost: 60% <-- Without this, the other end of the call reports "quiet and crackly" sound
+Capture:
+ capture: 40% (with red dot)
+ digital: 40% (with red dot)
+Switches:
+ Headphone: checked
+Options:
+ Input source: mic
+=== Twinkle Audio Settings ===
+Ringtone, Speaker, and Mic most likely need to be set to "ALSA:default : Default device"
+libasound2 will need to be installed in order for software audio mixing to work in ALSA. (actually it just makes it so you don't have to set it up manually)
+[[File:Example.jpg]]
+==Power Consumption==
+-1w consumption when off (no peripherals) - connected directly to power outlet
+--0.56 power factor
+-2w consumption when off (kb, mouse, monitor, ethernet connected) - connected directly to power outlet
+--0.41 power factor
+While booting, max power usage reached was 32w for only a moment. '''Machine consumes 26w''' whether idle or running numerous applications. While installing packages, consumption was 27w.
+===Power Consumption With Monitor===
+-1w consumption when off (kb, mouse, monitor, ethernet connected) and connected to surge protector with switch off.
+-3w consumption with power strip on but monitor and computer switched off.
+-3w consumption with monitor and power strip on but computer switched off.
+-When booting with monitor and computer through kill-a-watt meter, max usage showed 55w during boot. Idle at login screen they are '''consuming 49w''' with a power factor of 0.65
+===Global XFCE/XUbuntu Icons and User Settings===
+Basically I wanted a kiosk type setup, but xfce4's kiosk mode SUCKS.
+To get global icons the easiest way was to install "Sabayon" which allows you to create profiles for groups of users, and then start up an x session within your x session which you can then customize and save. When the users in the created profile login, they will have the desktop settings created.
+A new version of sabayon has been released that is not nearly as bug-filled as previous versions. You can find this here: https://edge.launchpad.net/~sbalneav/+archive/ppa

Difference between revisions of "Low Power Workstation"