FPV

https://www.youtube.com/playlist?list=PL7WaECFssECJITJMCyVrwp4WezSHTWbmN - "FPV Tutorial: Tips for new quad flyers"

Transmitter (TX)

Radiomaster TX16s

Solid choice for a traditional TX style radio. Is on the large/bulky side, but with good grip and usable for either thumb controls (default sticks are a bit long with sharp ends, but M4 threaded and replaceable) or "pinchers". Widely compatible multi-protocol radio, bit complex to setup (see Multi-Module doc link, below). Relatively inexpensive, very available from many sources. Seems very widely supported by simulators. Gimbals replaceable, and at purchase time can choose nicer Hall-Effect type for long-life and better feel. Multiple "Mode" choices available, including most common "Mode 2" for quad-copter pilots. Open firmware choices are first-class: shipped with OpenTX for stability, supported by EdgeTX for newer features (like touchscreen).

https://www.multi-module.org/ -- internal multi-module (multiprotocol radio) docs

How-To

https://www.youtube.com/watch?v=oDe9VJk37ws&list=PL1fGEpsCNIpYLt6lJq8HiRf6XE5-t0mST Tahoe Steve's "Radiomaster TX16S Beginner's How To Series"

Firmware

Flight Controllers

Betaflight

https://github.com/betaflight/betaflight-configurator

Multiprop

Quadcopters

Happymodel Mobula6

Quad ships without telemetry turned on in Betaflight; head to configurator and toggle to get VBAT/RSSI sensor access on TX.

https://blog.georgi-yanev.com/fpv/mobula6-48khz-jesc-complete-setup-review/ -- Extensive review with JESC 48kHz flash instructions

Protocol-Specific

ExpressLRS

https://www.getfpv.com/happymodel-expresslrs-f4-5a-5-in-1-aio-fc-w-built-in-2-4ghz-rx.html

Battery Info

LiPo

https://oscarliang.com/lipo-battery-guide/

RC Flight

Contents

FPV