Difference between revisions of "Sprite format"

From WTFwiki
Jump to navigation Jump to search
m (4 revisions)
 
(One intermediate revision by one other user not shown)
Line 37: Line 37:
 
<ol start="0">
 
<ol start="0">
 
<li>Set X to DATA</li>
 
<li>Set X to DATA</li>
<li><ul><li>While DATA is greater than 0</li><ul><li>Read 1 BYTE</li><li>Store that byte as the pixel at X,Y in the sprite</li><li>Increment X</li><li>Decrement DATA</li><li>Set X to 0</li></ul></ul></li>
+
<li><ul><li>While DATA is greater than 0</li><ul><li>Read 1 BYTE</li><li>Store that byte as the pixel at X,Y in the sprite</li><li>Increment X</li><li>Decrement DATA</li></ul><li>Set X to 0</li></ul></li>
 
<li>Set Y to DATA</li>
 
<li>Set Y to DATA</li>
 
<li>End of sprite data</li>
 
<li>End of sprite data</li>
 
</ol>
 
</ol>

Latest revision as of 22:50, 4 January 2013

Non-rectangular images in OMF are stored in this format:

Sprite Header

Length 1 WORD Length of sprite
X Position 1 SIGNED WORD TODO
Y Position 1 SIGNED WORD TODO
Width 1 WORD Width of the sprite, in pixels
Height 1 WORD Height of the sprite, in pixels
Index 1 BYTE Index of the sprite in already-loaded images table
Data missing 1 BYTE See below

For animations 12, 13 and 14, the index field will be treated as if it were 0. If the index is 0, the data missing field will be treated as if it were 0.

If the data missing flag is zero, the sprite data will follow the sprite header, as length BYTEs. In either case, element index of the sprite reuse table is consulted. If that element is present, or if no graphics data were present in the file, the data from the sprite reuse table are used. Otherwise, that slot in the table is filled with the image data just read from the file.

Sprite Data

The sprite data is decoded thusly:

  • Initalize X and Y to 0
  • Read 1 WORD as P
  • Modulus P by 4 to get OPCODE
  • Integer divide P by 4 to get DATA
  • Compare the OPCODE against the following and take that action
  1. Set X to DATA
    • While DATA is greater than 0
      • Read 1 BYTE
      • Store that byte as the pixel at X,Y in the sprite
      • Increment X
      • Decrement DATA
    • Set X to 0
  2. Set Y to DATA
  3. End of sprite data